SC1000, Sound Deadening Coating for Noise Reduction

-This is an indent product. Lead Time is Ten (10) Business Days.

-Please note that this is only for sound reduction and can reduce up to 20dB. Should you need a higher dB Reduction material, please contact our Sales Department. 


SC#1000 is a specially formulated water-based coating designed to reduce reverberant noise in metal panels, structures, ducts, etc. It offers ceramic insulation and soundproofing combined with excellent adhesion. SC#1000 removes noise and unwanted vibrations by converting them into low-grade heat while adding little mass.

Product Details

• Deadens sound caused by vibration or coming from outside sources (through walls/ceilings)
• The thick, rubber-like coating reduces sound
• Will not deaden echo or sound created within a space. For these issues use our Acousti-Coat
• Applies at 100 sq ft per gallon, per coat, with at least two coats recommended
• Water-based, clean up with warm water and soap.
  
  SC#1000 is a specially formulated water-based coating, comprised of 80% vacated ceramic microscopic beads, held in suspension by viscoelastic resin binders, which are designed to reduce reverberant noise in metal panels, structures, ducts, etc. SC#1000 has excellent noise reduction and transmission loss capabilities, plus the added advantage Hy-Tech’s ThermaCels, insulating ceramic microspheres. This product forms a continuous coverage, reaching all nooks and crannies, is not sectioned like an installed product, and acts as an excellent weatherproof coating. A waterborne, high-build formula that applies 5 times thicker than regular coatings, SC#1000 offers ceramic insulation and soundproofing combined with excellent adhesion. Unlike heavy mats which only add mass and lower the intensity of sound, with no vibration, SC#1000 removes noise and unwanted vibrations by converting them into low-grade heat, while adding little mass. The back-and-forth vibrations, mechanical energy, are converted to low-level thermal energy or heat, providing structural resonance and impact noise deterrence. Low odor Use on noisy machines, metal studs and framing, motor cabinets and housings, vehicle body panels, boats, buses, RV's, airplanes, A/C equipment, and ductwork, anywhere that is a major source of noise, vibrations, or motion High resistance to heat transfer Prepare surface by thoroughly removing dirt, grease, loose and peeling paint, and other foreign materials, such as mold, mildew, and algae. Apply only to a sound, well-prepared surface. Rusted areas need to be treated with a rust-stabilizing product prior to application and properly primed. Stir well before use. Do not thin, use the product as is. Drying time, (approximately 2 to 4 hours), will vary depending on temperature, humidity, and location. Apply using a brush, roller, or airless sprayer. KEEP FROM FREEZING.